ProgramMaster Logo
Conference Tools for 2017 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2017 TMS Annual Meeting & Exhibition
Symposium Energy Materials 2017: Energy and Environmental Issues in Materials Manufacturing and Processing
Presentation Title Green Development is the Future Direction for Chinese Steel Industry
Author(s) Chunxia Zhang, Fangqin Shangguan, Haifeng Wang, Shourong Zhang, Ruiyu Yin
On-Site Speaker (Planned) Chunxia Zhang
Abstract Scope Progresses have been made in energy saving and environmental protection by Chinese steel industry. In 2013, the energy efficiency was improved by about 14.7%; specific smoke dust emission was reduced by about 58.3%; and specific SO2 emission was reduced by about 50.2%, comparing with that of 2005. Facing severe restriction of resources, energy and environment, Chinese steel industry must turn to green development. The green development strategic objectives up to 2020 have been set up based on the scenario analysis. For realizing the target of 2020, three kinds of key technologies have been selected for green development of steel industry and four countermeasures have also been put forward.
Proceedings Inclusion? Planned: Stand-alone book in which only your symposium’s papers would appear (indicate title in comments section below)

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Possible Way for Efficient Utilization of Coal Energy: The Combined Process of Ironmaking with Gasoline Synthesis and Electricity Generation
Approach for Pyrolysis Gas Release Modelling and its Potential for Enhanced Energy Efficiency of Aluminium Remelting Furnaces
C-1: Preparation of Battery-grade Ferrous Oxalate by Screening of Reaction Conditions
C-2: Synthesis and Characterization of Electrodes Made from Banana Peel for Multivalent Batteries
Energy Savings in Aluminium Sand Casting Foundries
Enhanced Thermoelectric ZT Constantan Alloy by Cryorolling
Fluoropolymer Coated Condensing Heat Exchangers for Low-grade Waste Heat Recovery
Green Development is the Future Direction for Chinese Steel Industry
Green Manufacturing Process of Shougang Jingtang Steel Plant
Nitrate and Other Anion Removal from Waste Water Using the Hydroflex Technology
Numerical Approach for the Implementation of the Interaction of Pyrolysis Gases and Combustion Products in an Aluminium Melting Furnace
Prediction and Optimal Scheduling of Byproduct Gases in Steel Mill: Trends and Challenges
Processing Non-Oriented Electrical Steels Using Inclined/Skew Rolling Schemes
Study on Treatment of Chromium Slag by Metallurgical Sintering Process
Sustainability and Applicability of Light Metals Producing Processes
The Combined Cycle Power Plant (CCPP) Used In Energy Conversion of Steel Smelting Production
The Influence of Water Vapour on the Fuming Rate in a Ferromanganese System
The Introduction and Process Optimization Research of Oxygen Blast Furnace Ironmaking Technology
Thermoelectric Properties of La-doped SrTiO3 Materials Prepared by Mechanical Alloying
Waste Energy Recovery Technology of Iron and Steel Industry in China

Questions about ProgramMaster? Contact programming@programmaster.org