ProgramMaster Logo
Conference Tools for 2017 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2017 TMS Annual Meeting & Exhibition
Symposium Pan American Materials Congress: Steels
Presentation Title Dissolution of MgO Containing Additions in Steelmaking Slag and Its Impact on the Formation of Magnesiowustite
Author(s) Antonio Augusto Martins, Rafaela Pereira Batista, Roberto Ribeiro de Avillez, Andre Costa E Silva
On-Site Speaker (Planned) Andre Costa E Silva
Abstract Scope MgO containing additions are used in steelmaking processes to protect refractories. Solid MgO and FeO are fully miscible. Thus, formation of magnesiowustite is possible in oxidizing slags. In the EAF slags, magnesiowustite saturation is believed to play a critical role in foaming. In Converters, this phase is believed to affect slag splashing/coating processes. Previous work indicated that the dissolution of MgO containing additions may be hindered by the formation of solid layers on their surfaces. Thus, thermodynamics alone is not sufficient to support the assumption that magnesiowustite will be present. In this work the evolution of MgO containing phases was followed through sampling converter slags at different stages of the process. The samples were analyzed and the observed phases fractions were compared to equilibrium phase distribution calculated using computational thermodynamics. The results were analyzed considering dissolution mechanisms and barriers. The impact on magnesiowustite formation and steelmaking process is discussed.
Proceedings Inclusion? Planned: Stand-alone book in which only your symposium’s papers would appear (indicate title in comments section below)


Controlling Mold Heat Transfer by Dispersed Metallic Particles in Slag Film during Continuous Casting of Steels
Developing Sustainable Pipeline Steels
Dissolution of MgO Containing Additions in Steelmaking Slag and Its Impact on the Formation of Magnesiowustite
Evolution of Austenite Dislocation Density during Hot Deformation using a Physical Dynamic Recrystallization Model
Hot-stamping Response of Laser Welds in Low-carbon Steels
Influence of a Rapid Heating on the Microstructure and Properties of Press-hardening Steel Sheets
Jansto: New Generation Niobium Bearing Structural Steels for Future Infrastructure Demands
Microstructural Evolution in Microalloyed Steels during Thermomechanical Rod Rolling
Modeling of Metal-Slag Mass and Momentum Exchanges in Gas-Stirred Ladles
Modeling Precipitation and Dissolution of Microalloying Carbonitrides in Steels Using Computational Thermodynamics- techniques, Possibilities and Present Challenges
New Challenges in Thermomechanical Processing: Applications in the Cold Mill
PAN-60: Effect of Titanium Sulfide Precipitates on Grain Size in Low Carbon Steel
PAN-61: Hydrogen Gaseous Embrittlent Effect over Mechanical Properties of a Heat Treated Experimental Microalloyed Steel with Different Cooling Rates
PAN-62: Influence of Oxide Size and Composition on MnS Formation in Continuous Casting Slab of Low Carbon Steel
PAN-63: Kinetic Study of the Austenite Decomposition during Continuous Cooling in a Welding Steel
PAN-64: Study of Ductile Austemperized Iron Alloyed with V, Mo AND Cr
PAN-66: Tempering Response of Bainitic and Martensitic Microstructures
PAN-67: Using CCT and TTT Diagrams Obtained by Simulation for Developing AHSS
Study on Adjustment and Optimization of LF Refining Slag of Spring Steel 55SiCrA
The Development of NbC Reinforced Martensitic Stainless Steel Composites for High Wear and Corrosive Environments
The Effect of Deoxidation Practice on Quality Characteristics of Converter Refined AISI 1006 Steel
The Effect of Particle Speed and Impact Angle on the Erosion of Newly Developed API X120 Pipeline Steel
The Influence of Hydrogen on Tensile Properties of TRIP-aided Bainitic Ferrite Steels with Carbon/Manganese Variations
The Research on the Relationship between Gas Movement Behaviors and Circulating Flow of the Molten Steel in RH

Questions about ProgramMaster? Contact