ProgramMaster Logo
Conference Tools for 2018 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2018 TMS Annual Meeting & Exhibition
Symposium Materials Processing Fundamentals
Presentation Title
On-Site Speaker (Planned)
Abstract Scope
Proceedings Inclusion? Planned: None Selected


A Current Efficiency Prediction Model Based on Electrode Kinetics for Iron and Copper during Copper Electrowinning
CaCl2-O2 Roasting of Stibnite and a Complex Copper Concentrate at 500-650C
Chalcogenide Melts Study for High Temperature Thermoelectricity
Convection-Diffusion Model of Lithium-Bismuth Liquid Metal Batteries
D-46: DEM Simulation of Dispersion of Cohesive Particles by Spontaneous Inter-particle Percolation in a 3D Random Packed Bed
D-47: Effects of High Energy Ag7+ Ion Irradiation on the Magnetic and Topographical Properties of Amorphous Co–Fe Thin Films
D-49: Ground-based Experiments Using an Electrostatic Levitator and Numerical Modeling of Convection Inside Electromagnetically-levitated Molten Iron-cobalt Droplets in Support of Space Experiments
D-50: Hybrid Modeling for Endpoint Carbon Content Prediction in EAF Steelmaking
D-57: Structural and Deformation Behavior of Different Hematite Ore Pellets
Dephosphorization Kinetics between Bloated Metal Droplet and Slag Containing FeO: The Influence of CO Bubbles on the Mass Transfer of Phosphorus in the Metal
Desulfurization of Copper-iron Reduced from Copper Slag
Effect of BO1.5 Addition on the Thermal Conductivity and the Structure of the CaO-BO1.5-AlO1.5 Mold Flux System
Effect of Chloride Ions on the Copper Extraction Using LIX 984N and Acorga M5910
Effects of Aging Treatment on the Microstructure and Mechanical Properties of a Nanoprecipitates-strengthened Ferritic Steel
Electron Beam Surface Hardening of AISI H13 Tool Steel
Electrovortex Flow in Metal Melts: Experiment and Simulation
Experimental Study on Formation Mechanism of Hot Charging Cracks of HSLA Steel
Highly Productive Machining of the Newest, Super Hard Intractable Composite-ceramic Materials
Improvement of Tensile Properties of Vertical-twin-roll-cast Ti/Al Clad Sheets
Influence of Heat Treatment on PKS-HSS Cutting Tool (ASTM A600) and its Behaviour during Machining of Mild Steel (ASTM A36)
Interface Fields Affecting Solidification Microstructure
Leaching Recovery of Silver from Used Radiographic Films
Manufacturing of a New Type of High Strength High Conductivity Cu–Cr Alloy
Mapping and Evaluating All the Ways to Remove Copper from Steel
Measurement of Thermodynamic Property of Mg in Molten Iron Using Transpiration Method
Microstructure Characterization and Mechanical Properties of Mg-9Al (wt.%) Alloy during Low-temperature Equal Channel Angular Extrusion (ECAE)
Research on Sulfur Conversion Behavior in the Oxygen Pressure Acid Leaching Process for the High Indium Sphalerite
Research on the Pinpoint Controlling of CRA N08028 OCTG Microstructure and Properties
Spatio-temporal Evolution Modeling of the Laser Helical Drilling with Femtosecond Pulses
Study on Emulsion Phenomena and Field Flow Pattern in Side-blown Copper Smelting Process
Study on Minimum Starting Energy of Self-stirring Reactor Driven by Pressure Energy
Study on the Heat Treatment of UNS N 10003 Alloy after Cold Working
Surface Tension and Viscosity of Gamma-TiAl Alloys and Ti6Al4V Measured in Containerless Electromagnetic Processing under Reduced Gravity Conditions
The Effect of a Sulfur Addition on the Formation and Behavior of CaS Inclusions in a Steel Melt during a Secondary Refining Process without a Ca-treatment
The K2SO4-CaSO4 System and Its Role in Fouling and Slagging During High-Temperature Processes
The Study of Copper Leaching from Conichalcite and Chalcopyrite Using Alternative Lixiviants
The Use of the PDA Method to Obtain Process Feedback on Inclusion Characteristics Based on Production Samples
Thermodynamic Properties of Magnetic Semiconductors Ag2FeSn3S8 and Ag2FeSnS4 Determined by the EMF Method
Ultrasound for Next-generation Alloy Casting
Waste Lithium-ion Battery Recycling in JX Nippon Mining & Metals Corporation
Yield Strength Prediction in 3D during Local Heat Treatment of Structural A356 Alloy Components in Combination with Thermal-stress Analysis

Questions about ProgramMaster? Contact