ProgramMaster Logo
Conference Tools for 2018 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2018)
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2018 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2018)
Symposium 2018 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2018)
Presentation Title A Digitally Driven Hybrid Manufacturing Process for the Flexible Production of Engineering Ceramic Components
Author(s) Jack Hinton, David Flynn, Russell A Harris, Robert W Kay
On-Site Speaker (Planned) Jack Hinton
Abstract Scope Predominant techniques for manufacturing ceramic components use template-driven methods, which hampers responsiveness and impose significant design constraints. This has driven significant interest towards using additive manufacturing approaches. When used in isolation these techniques are restricted by uncontrollable porosity, high shrinkages during firing plus a lack of process-compatible materials. This paper presents the research and development of a new hybrid manufacturing process chain for the agile production of engineering grade ceramics components. The combination of high viscosity ceramic paste extrusion, sacrificial support deposition and subtractive micro-machining has yielded complex monolithic ceramic components with feature sizes of 100Ám, part densities of ~99.7%, surface roughness down to ~1Ám Ra and 3-point bend strength of 218MPa. Since a wide range of materials can be formulated into visco-elastic pastes they can be readily deposited using this approach.
Proceedings Inclusion? Definite: Post-meeting proceedings


3D Bioprinting with Alginate Hydrogel and Polymer Bioactive Glass Composite
3D Printable Lithium Ion Batteries as Energy Storage Devices
3D Printed Aircraft Competition at the University of Texas at Arlington
3D Printed Electronics
3D Printed Electronics Design Software with Autorouting Capabilities
3D Printed Fastener-free Connections for Non-structural and Structural Applications – An Exploratory Investigation
3D Printing of Hybrid Core-shell Architectures via Direct Write
3D Printing of Nanocomposites for Multifunctional Materials
4D Printing of Composites with Embedded Continuous Fibers
5-Axis Path Planning for Direct Energy Deposition Using Deformed Centerline Transformation
A Brief History of the 3D Printed Car: Failures, Successes, and Future Opportunities
A CAD-based Workflow and Mechanical Characterization for Additive Manufacturing of Tailored Lattice Structures
A Comparative Investigation of Sintering Methods for Polymer 3D Printing Using Selective Separation Shaping (SSS)
A Comparison of Modeling Approaches for Predicting the Elastic-plastic Response of Additively Manufactured Honeycomb Structures
A Data-driven Framework for HP’s MJF 3D Printer for Correlation and Prediction of Part Mechanical Properties
A Digitally Driven Hybrid Manufacturing Process for the Flexible Production of Engineering Ceramic Components
A Guideline for Additively Manufacturing New Materials Using Laser Powder Bed Fusion
A Methodology for Modular Design Rule Representation and Ontology Development for Additive Manufacturing
A Modified Inherent Strain Model for Fast Prediction of Residual Stress and Deformation for Laser Metal Additive Manufacturing
A New Digitally Driven Process for the Fabrication of Integrated Flex-rigid Electronics
A Novel Microstructure Simulation Model for Direct Energy Deposition Process
A Novel Study on EDM Processing of Support Structures in Metal AM
A Novel Thermoplastic Polymer Weld Strength Theory for Material Extrusion AM
A Path Planning Algorithm for the Design of Additively Manufactured Functionally Graded Materials
A Physical Hash for Preventing and Detecting Cyber-physical Attacks in Additive Manufacturing Systems
A Review On The Additive Manufacturing Of Fiber Reinforced Polymer Matrix Composites
A Study of L-PBF Process Parameters on Martensitic Phase Transformation Temperature of NiTi Shape Memory Alloys via Taguchi’s Robust Design Methodology
A Study of the Effect of Bond Length on Bond Strength in Fused Deposition Modeling Using Transient Heat Transfer Analysis
A Sustainable Additive Approach for the Achievement of Tunable Porosity
Accurate Determination of Laser Spot Position during LPBF Process Thermography
Acoustic emission technique for online detection of fusion defects for single tracks during metal laser powder bed fusion.
Adaptive Shape Conforming Honeycomb Lattice Infill for 3D Printing of Thin Wall Objects
Additive Manufactured Stainless Steel Nanocomposites with Uniform Dispersion of Nanoparticles
Additive Manufacturing Assisting Thermoacoustic Refrigeration System Development
Additive Manufacturing of Alumina Components by Extrusion of In-situ UV-cured Pastes
Additive Manufacturing of Electrical Conductors
Additive Manufacturing of Energetic Materials
Additive Manufacturing of Lightweight Mirrors
Additive Manufacturing of Liners for Shaped Charges
Additive Manufacturing of Metal Bandpass Filters for Future Radar Applications
Additive Manufacturing of Metal Functionally Graded Materials: A Review
Additive Manufacturing of Soft Electronics & 3D Microfluidics Using Liquid Metal Patterning Processes
Additive Manufacturing of Soft Ferromagnetic Alloys Using Laser Engineered Net Shaping
Additive Manufacturing of Stainless Steel Nanocomposites
Additive Manufacturing of Sustainable Composites
Additive Manufacturing Tools for Refrigeration Foaming Operations
Additive Manufacturing with Modular Support Structures
Additively Manufactured Polyphenylene Sulfide: Structure and Properties of Composites and Blends
Advanced Model Predictions of Mechanical Properties and Process Parameter Effects in High Throughput L-PBF Tension Specimens
Aligning Material Extrusion Direction with Mechanical Stress via 5-axis Tool Paths
Ambient-temperature Indentation Creep of an Additively Manufactured Ti-6Al-4V Alloy
An aerospace integrated component application based on Selective Laser Melting: design, fabrication and FE simulation
An Efficient Meso-scale Thermal Simulation for Powder Bed Fusion
An Experimental Study of the Influence of Energy Input on Porosity and Mechanical Properties of Nylon 12 Parts Produced via High Speed Sintering
An Improved Vat Photopolymerization Cure Model Demonstrates Photobleaching Effects
An Investigation into Metallic Powder Thermal Conductivity in Laser Powder-bed Fusion Additive Manufacturing
An Investigation of the Fatigue Strength of Multiple Cellular Structures Fabricated by Electron Beam Powder Bed Fusion Additive Manufacturing Process
An Investigation on Sound Characteristics of 3D-printed String Music Instruments
Application of SWIR Camera in the Monitoring and Control of Overhang Quality in Selective Laser Melting
Artificial Intelligence-enhanced Multi-material Form Measurement for Additive Materials
Assessing the Utility of a Superposition-based Finite Element Approach for Part-scale Thermal Simulations
Assessment of Octet Truss Lattice Structures Having Hollow Struts
Ballistic Evaluation of Additively Manufactured Metallic Lattice Structures
Beam Shaping in Powder Bed Based Additive Manufacturing: A Numerical Approach to Determine Adjusted Beam Shapes
Binder Jet Printing and Post-processing of Ni-Mn-based Functional Magnetic Materials
Binder Jetting Additive Manufacturing of Water-Atomized Iron
Binder Jetting of High Temperature and Thermally Conductive (Aluminum Nitride) Ceramic
Binder Jetting of Piezoelectric Ceramic
Bioresorbable Vascular Scaffolds 3D Printed via microCLIP
Bone Tissue Engineering Scaffolds of Ti-6Al-4V with Variable Porosity: Design, Fabrication and Structural Evaluation
Build Direction and Infill Optimization for Fused Deposition Modeling
Cellular Automata (CA) Modeling of Stainless Steel Nucleation and Growth Applied to Selective Laser Melting
Cellular Structures for Blast and Impact Protection with Selective Laser Melting
Challenges of Measuring Adhesion of Printed Inks and the Potential for Surface Treatments to Alter the Adhesive Failure Mode
Characterization and Analysis of Geometric Features for the Wire-arc Additive Process
Characterization of 3D Printing Properties of Vitamin-D Enriched Orange Concentrate Using Different Starches
Characterization of Electron Beam Melted Parts Produced by Coarse Ti6Al4V Powders with Large Layer Thicknesses
Characterization of High-deposition Polymer Extrusion in Hybrid Manufacturing
Characterization of Impact Toughness of 304L Stainless Steel Fabricated through Laser Powder Bed Fusion Process
Characterization of In Situ Diagnostics Using High Speed Imaging
Characterization of Spatter Particles Formed during Laser Powder Bed Fusion
Characterization of Stiffness Properties of Fused Deposition Modeling Thermoplastic Components
Characterizing Binder-powder Interaction in Binder Jetting Additive Manufacturing via Sessile Drop Goniometry
Characterizing Compositional Transitions in Pellet-based 3D Printing of Functionally Graded Materials
Characterizing Interfacial Bonds in Hybrid Metal AM Structures
Characterizing Powder Spreading Dynamics in Powder Bed Fusion AM Process by High-speed X-ray Imaging
Characterizing the Dynamics of Laser Powder Bed Fusion Additive Manufacturing Processes by High-speed X-ray Imaging/Diffraction
CNTs/CF Reinforced Composites for Programmable Deformation by Fused Deposition Modelling 3D Printing
Coaxial Imaging of Directed Energy Deposition Processes—What Are We Actually Measuring?
Comparison of Ex Situ X-ray Tomography and In Situ Monitoring to Gain Control Over Defects during Laser Powder Bed Fusion
Comparison of Stainless Steel 316L Parts Made by FDM-based and SLM-based Additive Manufacturing Processes
Complementary IR Heating Systems for Selective Laser Melting/Sintering
Composite Cu-C and Cu-W Thermal Concentrator Design Using LENS
Conceptual Modelling of Bi-directional Bead Geometry Prediction in Laser Metal Wire Deposition (LMD-w)
Conduction-based Laser Power Control for Overhang Structures
Continued Evolution of a Part-scale Finite Element Model for Selective Laser Melting at LLNL
Continuous Property Gradation for Multi-material 3D-printed Objects
Continuously Reinforced and Wholly Thermoplastic Composite Filaments for Application in Fused Filament Fabrication
Control System Framework for Using G-Code-based 3D Printing Paths on a Multiple Degree-of-Freedom Robotic Arm
Controlling Dispersion Characteristics of Ag-PDMS Conductive Composites
Convection Heat Transfer Coefficients for Laser Powder Bed Fusion
Correlating Local Part Bed Temperature Variations with Mechanical Properties in Selective Laser Sintering of Carbon Fiber Reinforced Polyetheretherketone (PEEK)
Correlations of Interlayer Time with Distortion of Large Ti-6Al-4V Component in Laser Metal Deposition with Wire
Correlative Beam Path and Pore Defect Space Analysis for Modulated Powder Bed Fusion Process
Corrosion Behavior of Selective Laser Melted 304L Stainless Steel
Crack Growth-based Fatigue Life Prediction of LPBF 17-4 PH SS Using Defect Characteristics
Creep Performance of Laser Powder Bed Fused Inconel 718 and Effect of Post Processing
Crucial Measurements and Their Implications in Metal Powder Additive
Curing Behavior of Thermosets for the Use in a Combined Selective Laser Sintering Process of Polymers
Curvature-based segmentation of powder bed point clouds for in-process monitoring
Data Mining Approaches for Price Determination of 3D Printing Services in Decentralized Manufacturing-as-a-Service Marketplace
Defect Identification and Mitigation via Visual Inspection in Large-scale Additive Manufacturing
Defect Signatures for Metal Laser Powder Bed Fusion
Demonstration of Two-photon Polymerization Printing for Inertial Confined Fusion Capsules
Densification of H13 Components Fabricated by Binder Jet Additive Manufacturing – Scaling up and Associated Challenges
Deposition Controlled Magnetic Alignment in Iron-PLA Composites
Design and 3D printing of patient specific polymer hand splint concept
Design and Additive Manufacture of Quadcopter Drone Components
Design and Optimization of Spatially-varying, Multi-material 3D Printed Soft Lattice Structures
Design and Robotic Fabrication of 3D Printed Moulds for Composites
Design Guidelines for a Software-supported Adaptation of Additively Manufactured Components with Regard to a Robust Production
Design of a Low Cost, Desktop-scale, High Temperature System for Fused Filament Fabrication of High Performance Polymers
Design Optimization, Fabrication, and Testing of 3D Printed Aircraft Structure Using Fused Deposition Modeling
Design Rules for Additively Manufactured Wrist Splints Created Using Design of Experiment Methods
Designing for Residual Stress with Glass
Designing Support Structures for Removability: A New Approach to Optimize Build Orientation for Laser Powder Bed Fusion
Detection of Porosity in Laser Powder Bed Fusion Using Spectral Graph Theoretic Machine Learning of In-process Optical Emission Spectroscopy Signals.
Development of a customized CPAP mask using reverse engineering and additive manufacturing
Development of a Thermoplastic Biocomposite for 3D Printing
Development of a Very Large Scale Robotic Hybrid AM System through the LASIMM Project
Development of an Acoustic Process Monitoring System for the Selective Laser Melting (SLM)
Development of an Automated Laser Control System for Improving Temperature Uniformity in Selective Laser Sintering
Development of an Engineering Diagram for Additively Manufactured Austenitic Stainless Steel Alloys
Development of an In-situ Layerwise Imaging System for Metallic Powder Bed Fusion Additive Manufactured Parts
Development of an Indigenous and Innovative Sand 3D Printer
Development of Customized Cellular Structures to Match the Mechanical Properties of Human Trabecular Bone
Development of Novel High Temperature Laser Powder Bed Fusion System for the Processing of Crack-susceptible Alloys
Development of Pre-Repair Machining Strategies for Laser-aided Metallic Component Remanufacturing
Development of Titanium and Steel Alloys Optimized for AM
Digital Micromirror Device (DMD)-based Stereolithography of 3D Vascular-like Structures with Living Cells Encapsulated
Digitally-driven Micro Surface Patterning by Hybrid Manufacturing
Direct Write and 3D Printing of Ceramic Polymers: Materials, Approaches and Applications
Direct Writing of Films from High Speed Aerosol Deposition of Ag
Dissipative Non-linear Topology
DMP Monitoring as a Process Optimization Tool for Direct Metal Printing (DMP) of Ti-6Al-4V
Dual Purpose of Rolling in Additively Manufactured Mild Steel (ER70S-6)
Dynamic Defect Detection in AM Parts
Dynamic Mechanical Analysis of ABS from Hybrid Additive Manufacturing by Fused Filament Fabrication (FFF) and Shot Peening (SP)
Dynamic Mechanical Characterization of Additively Manufactured Fiber Reinforced Thermoplastic Composites with Respect to Toolpath Orientation
EBSM Online Monitoring System Based on Machine Vision
Economies of Complexity of 3D Printed Sand Molds for Casting
Education of Additive Manufacturing - An Attempt to Inspire Research
Effect of Cooling Rate on the Microstructure Mechanical Properties of Zr-based Bulk Metallic Glasses by Selective Laser Melting
Effect of energy density on the consolidation mechanism and microstructural evolution of laser cladded functionally-graded composite Ti-Al system
Effect of Environmental Variables on Ti-64 AM Simulation Results
Effect of Heat Treatment on the Phase Transformation and Mechanical Properties of Ti6Al4V Fabricated by Selective Laser Melting
Effect of Initial Surface Features on Laser Polishing of a Co-Cr-Mo Alloy Made by Powder-bed Fusion
Effect of Inter-layer Cooling Time on Distortion and Mechanical Properties in Metal Additive Manufacturing (AM)
Effect of Laser Additive Manufacturing on Microstructure Evolution of Inoculated Zr47.5Cu45.5Al5Co2 Bulk Metallic Glass Matrix Composites
Effect of Porosity on Electrical Insulation and Heat Dissipation of Fused Deposition Modeling Parts Containing Embedded Wires
Effect of Powder Degradation on the Fatigue Behavior of Additively Manufactured As-Built Ti-6Al-4V
Effect of Powder Formation and Laser Scan Length on Powder Bed Fusion 17-4 Stainless Steel
Effect of Process Parameters on Mechanical Properties of Wire and Arc Additive Manufactured AlCu6Mn
Effect of Process Parameters on the Surface Roughness and Fatigue Behavior of Additively Manufactured Alloy 718
Effect of Process Variables on Porosity Formation in Laser and E-beam Power-bed Additive Manufacturing
Effect of Shield Gas on Surface Finish of Laser Powder Bed Produced Parts
Effect of Standoff Distance on Built Geometry in Directed Energy Deposition
Effect of Subsurface Defects on Surface Topography in Additive Manufactured Parts
Effect of Thermal Exposure to Mechanical Properties of Laser Sintered Polyamide 11
Effect of Wall Thickness and Build Quality on the Compressive Properties of 304L Thin-walled Structures Fabricated by SLM
Effects of Defects on the Mechanical and Electrical Properties of AM Parts
Effects of Design Parameters on Thermal History and Mechanical Behavior of Additively Manufactured 17-4 PH Stainless Steel
Effects of Direct Metal Deposition Combined with Intermediate and Final Milling on Part Distortion
Effects of Discontinuous Build Strategies on the Mechanical Properties of Material Extrusion AM Parts
Effects of Electric Field on Selective Laser Sintering of Yttria-stabilized Zirconia Ceramic Powder
Effects of Elemental Segregation during SLM from Atomistic Simulations
Effects of Filler Morphology and Nozzle Size on Anisotropy in 3D Printed Epoxy Composites
Effects of Identical Parts on a Common Build Plate on the Modal Analysis of SLM Created Metal
Effects of in-situ Compaction and UV-curing on the Performance of Glass Fiber-reinforced Polymer Composite Cured Layer by Layer
Effects of Inter-layer Dwell Time in Laser Powder Bed Fusion
Effects of Layer Orientation on the Multiaxial Fatigue Behavior of Additively Manufactured Ti-6Al-4V
Effects of Powder Recycling on the Mechanical Properties of Additively Manufactured Stainless Steel 17-4PH
Effects of Process Parameters and Heat Treatment on the Microstructure and Mechanical Properties of Selective Laser Melted Inconel 718
Effects of Surface Treatments on Interlayer Bonding Strength of FDM-printed Parts
Effects of Thermal Camera Spatial and Temporal Resolution on Feature Extraction in Selective Laser Melting
Effects of Thermal Camera Spatial and Temporal Resolution on Feature Extraction in Selective Laser Melting
Efficient Topology Optimization of Variable-density Lattice Structure for Convective Heat Transfer
Elucidating the Role of Fluid-particle Interaction in Binder Jet Additive Manufacturing
Elucidating the Role of Fluid-particle Interaction in Binder Jet Additive Manufacturing
Energy and Charge Transport during Pulsed Electron Beam Melting of Solid and Powder Ti Using Custom Electron Beam Welder
Energy Consumption Optimization with Geometric Accuracy Consideration for Additive Manufacturing Processes
Enhanced Properties of Mullite Ceramic Foams Prepared by Selective Laser Sintering using Fly Ash Hollow Spheres as Raw Materials
Epitaxial Columnar Grain Growth Modeling During Laser Power Bed Additive Manufacturing Based on a Dendrite Tip Tracking Approach
Error: Low Disk Space - Development of a High-speed Temperature Imaging System for Powder Bed Fusion
Establishing Property-Performance Relationships through Efficient Thermal Simulation of the Laser-Powder Bed Fusion Process
Evaluating Parameters and Performance of a Metallized Material Spray-deposition Process
Evaluating the Relationship between Deposition and Layer Quality in Large-scale Additive Manufacturing of Concrete
Evaluating the Surface Finish of A356-T6 Cast Parts from Additively Manufactured Sand Molds
Evaluation of Fully Functional Specialised Software for the Production of Additive Manufactured Wrist Splints
Evaluation of Thermal Metrics for the Comparison of Finite Element Models with In-situ Thermal Images for Laser-based Additive Manufacturing
Evolution of Microstructure and Mechanical Properties with Heat Treatment of PBF Austenitic 316L Stainless Steel
Examination of the Connection between Selective Laser-melted Components Made of 316L Steel Powder on Conventionally Fabricated Base Bodies
Examining the Effect of DFAM Design Rule Presentation on Part Redesign Quality
Experience with Additive Manufacturing for Navy Sustainment
Experimental Calibration of Nanoparticle Sintering Simulation
Experimental Characterization of a Direct Metal Deposited Cobalt-based Alloy on Tool Steel for Component Repair
Experimental Evaluation of Coaxial Imaging of Directed Energy Deposition
Experimental Investigation of Printing Parameters on Material Distribution in 3D Spray Cementitious Material Printing Process
Experimental Study of the Sub-systems in a Microscale Additive Manufacturing Process
Fabricating Functionally Graded Materials by Ceramic On-demand Extrusion with Dynamic Mixing
Fabrication and Microstructural Characterisation of Additively Manufactured Nickel Aluminum Bronze Parts
Fabrication of Aligned Nanofibers along Z-axis – A Novel 3D Electrospinning Technique
Fabrication of Crack-free Regular-C HX Superalloy Using Laser Powder Bed Fusion
Fabrication of Support-less Engineered Lattice Structures via Jetting of Molten Aluminum Droplets
FAME Outstanding Young Researcher: Hybrid- Additive Manufacturing (AM): Role of Mechanical Design and Traditional Manufacturing Processes in the Adoption of Metal AM
Fast Prediction of Thermal History in Large-scale Part Fabricated via a Laser Metal Deposition Process
Fast Scanning Differential Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling
Fast Solution Strategy for Transient Heat Conduction for Arbitrary Scan Paths in Additive Manufacturing
Fatigue and Fracture Behavior of 17-4 PH Stainless Steel Fabricated via Laser Powder Bed Fusion (LPBF)
Fatigue Behavior of EBM Ti-6Al-4V after Surface Processing: A Preliminary Study
Fatigue Life Prediction of Additively Manufactured Metallic Materials Using a Fracture Mechanics Approach
Fatigue Properties of Ultrasonic Treated Direct-metal-laser-sintering Manufactured Metallic Materials
Fault Detection in Selective Laser Sintering with Optical Coherence Tomography
Feasibility of Non-contact Powder Bed Characterization through Thermal Measurements
Fiber-Fed Glass Additive Manufacturing
Fiber-fed Printing of Free-form Free-standing Glass Structures
Fiber Traction Printing--A Novel Additive Manufacturing Process of Continuous Fiber Reinforced Metal Matrix Composite
Fieldable Platform for Large-Scale Deposition of Concrete Structures
Finite Element Analysis of Additively Manufactured Conformal Negative Stiffness Honeycombs
Finite Element Modeling of Metal Lattice Using Commercial FEA Platforms
Finite Element Modeling of the Selective Laser Melting Process for Ti-6Al-4V
Freeform and Additive Manufacturing (FAME) Award: The Advances in 4D Printing
Full Field Strain Measurement of Material Extrusion AM Parts with Both Solid and Sparse Infill Geometry
Fused Deposition Modeling Process Parameter Optimization under Uncertainty
Geometric Deep Learning for On-demand Production of Customized Products by Additive Manufacturing
Harsh Environmental Testing of Conductive Links for Resilient Hybrid Electronics
High-efficiency, High-resolution Multimaterial Fabrication for Digital Light Processing-based Three-dimensional Printing
High-resolution, Layer-based Surface Profilometry of Selective Laser Melting for Defect Detection and Quality Control
High-speed, In-situ Monitoring of Microcracking of W for Different SLM Scan Strategies
High-Temperature Vat-Photopolymerization
High Speed In Situ Measurement of the Cooling Rate in a Complex Part Manufactured Using Powder Bed Fusion
High Speed Visualisation and Multiphysics Modelling of Laser PBF
High Throughput Fine Feature Fused Filament Fabrication Using A Multi-valve Extrusion Head
How Does Additive Manufacturing Help Senior Capstone Projects?
Hybrid Directed Energy Deposition for Smart Structural Elements
Hybrid Manufacturing with FDM Technology for Enabling Power Electronics Component Fabrication
Hybrid Printing and Nanoimprint Fabrication of Functional Surfaces
Immiscible-interface Assisted Direct Metal Drawing
Impact of Extended Sintering Times on Mechanical Properties in PA-12 Parts Produced by Powderbed Fusion Processes
Impact Testing of 3D Printed Kevlar-reinforced Onyx Material
Improving EBM Processability of Metallic Glass Using an Electrically Conductive Powder Coating
Improving Fracture Strength of FFF Parts via Thermal Annealing in a Printed Support Shell
In-process Detection of Material Cross-contamination in Laser Powder Bed Fusion
In-situ Defect Detection through Monitoring and Modeling of Plume Characteristics
In-situ Micro-CT Observation of Void Evolution under Interrupted Tensile Loading in Additively Manufactured 316L Stainless Steel
In-situ Optical Emission Spectroscopy during SLM of 304L Stainless Steel
In Situ Investigations of Fracture in Sintering Materials
Incorporation of Automated Ball Indentation Methodology for Studying Powder Bed Fabricated 304L Stainless Steel
Incorporation of Nanomaterials for 3D Printing and Additive Manufacturing Applications
Increasing Interlaminar Strength in Large Scale Additive Manufacturing
Individual and Coupled Contributions of Laser Power and Scanning Speed towards Process-induced Porosity in Selective Laser Melting
Influence of Atmospheric Control in Laser Powder Bed Additive Manufacturing, on Part Quality and Long Term Powder Life
Influence of Cobalt on the Microstructure of in-situ mixed Inconel 718 and Co Manufactured in Selective Laser Melting
Influence of Grain Size and Shape on Mechanical Properties of Metal AM Materials
Influence of Light Elements on the Properties of Bulk Metallic Glass Parts Produced by Laser Beam Melting
Influence of Mesostructure on the Thermal and Mechanical Properties of Additively Manufactured Interpenetrating Phase Composites
Influences of Printing Parameters on Semi-crystalline Microstructure of Fused Filament Fabrication Polyvinylidene Fluoride (PVDF) Components
Insights into Powder Flow Characterization Methods for Directed Energy Distribution Additive Manufacturing Systems
Integrating Transient Thermal Simulations and In-situ High Speed Video for Laser Parameter Strategies in Metal Additive Manufacturing
Inter-bead Bond Strength Improvement of FDM Parts by Isothermal Heating
Interactions between Microbes and Laser Sintered Polymers
Interferometry Sensing Data Mining for Real-time Geometric Profile Measurement in Photopolymer Based Additive Manufacturing
Introduction of Antimicrobial Properties into Laser Sintered Polymers
Investigating Emissivity Dependence on Surface Roughness
Investigating Failure Mechanism of Additively Manufactured Metal Sample with Simulated Defects Using Simultaneous Mechanical Testing and X-ray Computed Tomography
Investigating Laser Beam Operations in Laser-powder Bed Fusion
Investigating Melt Pool Dynamics in Laser-powder Bed Fusion Using a Two-color Pyrometer
Investigation into Mechanical Property Variation in Overhang Geometries Manufactured by Selective Laser Melting
Investigation into the Crystalline Structure and sub-Tpm Exotherm of Selective Laser Sintered Polyamide 6
Investigation of Acoustic Field for Localized Particle Manipulation in Projection Photopolymerization
Investigation of external illumination strategies for melt pool geometry monitoring in SLM
Investigation of Pore Formation and Melt Pool Dynamics during Laser-metal Interaction Using High-speed Full-Field X-ray Imaging
Investigation on Constrained Surface for Continuous Projection Stereolithography
Junction Growth during Ultrasonic Additive Manufacturing
Keyhole Mitigation at Turn around Using a Predictive Mesoscopic Model
Knowledge-based Material Production in the Additive Manufacturing Lifecycle of Fused Deposition Modeling
Laser-Aided Additive Manufacturing of Glass
Laser Engineered Net Shaping of the CoCrFeMnNi High Entropy Alloy
Laser Heated Electron Beam Gun Optimization to Improve Electron Beam Additive Manufacturing and Presentation of Open Source Controls for AM
Laser Metal Additive Manufacturing on Graphite
Laser Reflectometry and Its Potential for LPBF In-situ Process Monitoring and Optimization
Laser Scan Pattern and Build Orientation Optimization for Laser Powder Bed Fusion Process
Laser Sintering of PA12/PA4,6 Polymer Composites
Laser Sintering of Polyamide 6 for Advanced Industrial Applications
Lattice Design Optimization: Crowdsourcing Ideas in the Classroom
Lattice Structure Support Fabrication Using Binder Jetting For Thin-Walled Features
Hide details for [<a href="/PM/PM.nsf/ApprovedAbstracts/AE1938B8865032DE8525826D006F05A7?OpenDocument">Layer-wise Profile MonitLayer-wise Profile Monitoring of Laser-based Additive Manufacturing
[Replication or Save Conflict]
Layer Height Measurement for In-situ Monitoring of Selective Laser Melting
Leveraging Temperature-dependent Rheological Behaviors of Ceramic Slurry for Support-free Fabrication
Local Microstructure Control across AM Processes and Alloy Systems
Local Thermal Conductivity Mapping of Selective Laser Melted 316L Stainless Steel
Low-cost Bio-printer Gantry Design and Prototyping Process Control for Future Medical Application
Low-temperature Powder Bed Fusion Processing of Poly(Phenylene Sulfide)
Low Cost Numerical Modeling of Material Jetting-based Additive Manufacturing
Low Cost, High Speed Stereovision for Spatter Tracking in Laser Powder Bed Fusion
LPBF Powder Feedstock Effects: A Study in Ti6Al4V
Machine Learning based Monitoring of Advanced Manufacturing Technologies
Machine Learning based Monitoring of Selective Laser Melting
Machine Learning for Modeling of Printing Speed in Continuous Projection Stereolithography
Machine Vision and Traditional Approaches for AM Process Monitoring and Control
Managing Metal AM Process Variability for Machine Drift Using FEA-based Analysis
Mandibular Repositioning Appliance Following Resection Crossing the Midline- A 3D Printed Guide
MAPP - Manufacture Using Advanced Powder Processes
Material Characterization for Lightweight Thin Wall Structures Using Laser Powder Bed Fusion Additive Manufacturing
Material Properties of Ceramic Slurries for Applications in Additive Manufacturing Using Stereolithography
Material Property Changes in Custom-Designed Digital Composite Structures Due to Voxel Size
Maturation of Wire + Arc Additive Manufacture Systems for Production of Large Scale Titanium Structures
Measurement of Geometric Variation in Negative Stiffness Structures Produced by Microstereolithography
Mechanical Challenges of 3d Printing Ceramics Using Digital Light Processing
Mechanical Performance of Ti-6Al-4V Octet Truss Lattice Structures Produced via Powder Bed Fusion (PBF)
Mechanical Properties Evaluation of Ti-6Al-4V Thin-wall Structure Produced by a Hybrid Manufacturing Process
Mechanical Properties of 17-4 PH Stainless Steel Additively Manufactured under Ar and N2 Shielding Gas
Mechanical Properties of Additively Manufactured Polymer Samples using a Piezo Controlled Injection Molding Unit and Fused Filament Fabrication compared with a Conventional Injection Molding Process
Mechanical Properties of Additively Manufactured Stainless Steel 17-4PH Schoen Gyroid Lattices
Mechanical Properties of Inconel 625 and 718 Processed Using a Renishaw’s Multi Laser Powder Bed Fusion System
Mechanical Properties of Ti6Al4V ELI Lattice Structure Fabricated by Selective Laser Melting: Effect of Pore Size and Porosity
Mechanical Properties of Zr-based Bulk Metallic Glass Parts Fabricated by Laser-foil-printing Additive Manufacturing
Mechanical Property Characterization of Cell-laden Gelatin Methacrylate-based Hydrogels
Mechanical Property Variation in Metal Lattice Struts
Mechanistic Examination of Post Processing to Improve the Fatigue Performance of Powder Bed Fused Ti-6Al-4V
Melt flow and its effect in Laser Powder-bed Fusion
Melt Pool Analysis and Meso-scale Simulation of Laser Powder Bed Fusion Process (L-PBF) with Ti-6Al-4V Powder Particles
Metal Additive Manufacturing in the Oil and Gas Industry
Metal Big Area Additive Manufacturing (MBAAM) for Tooling Applications
Metal Powder Feedstock Reuse in Additive Manufacturing: Characterization of 316L Stainless Steel
Metallurgical and Mechanical Characterization of a 316L Steel Elaborated by Selective Laser Melting
Method for a Software-based Design Check of Additive Manufactured Components
Methods of Depositing Anti-reflective Coatings for Additively Manufactured Optics
microCLIP Ceramic High-resolution Fabrication and Dimensional Accuracy Requirements
Microextrusion Based 3D Printing – A Review
Microstructural and Mechanical Characterization of Ti6Al4V Cellular Struts Fabricated by Electron Beam Powder Bed Fusion Additive Manufacturing
Microstructural Evolution, Densification Kinetics and Sintering Mechanisms of Binder Jet 3D Printed of Different Size Alloy 625 Powders
Microstructure and Mechanical Properties of Laser Repaired Inconel718 Superalloy Assisted with Electromagnetic Stirring
Microstructure and Physical Properties of Pure Copper Fabricated via Electron Beam Melting
Microstructure Evolution during Solid-state Ambient Condition Metal Additive Manufacturing
Microstructure Influence on the Strain-rate and Stress-state Behavior of Solid-state AM AFS-Depostion Aluminum Alloy 6061
Microstructure, Mechanical Properties, and Fatigue Behavior of Electron Beam Additive Manufactured Ti-6Al-4V
Microwave Assisted Selective Laser Melting of Technical Ceramics
Mitigating Coffee-ring Defect Formation in Ceramic On-demand Extrusion Parts
Mitigating Defects Based on High Speed, In Situ X-ray Imaging of Laser Powder Bed Fusion
Mitigation of Hypervelocity Impact Damage in Additively Manufactured Composites
Model Development for Residual Stress Consideration in Design for Laser Metal 3D Printing of Maraging Steel 300
Modeling a Scanning-mask Projection Vat Photopolymerization System For Large-area, High-resolution Additive Manufacturing
Modeling Residual Stresses Evolution in Steel from Hybrid Processing by Directed Energy Deposition and Laser Shock Peening
Modeling Strategies and Optimization of Additive-manufactured Structural Elements
Modeling the Melt Pool of the Laser Sintered Ti6Al4V Layers with Goldak’s Double-ellipsoidal Heat Source
Morphable Components Topology Optimization for Additive Manufacturing
MOVED FROM WEDNESDAY: On the Mechanical Behavior of Additively Manufactured Asymmetric Honeycombs
Multi-color Thermal Imaging in Laser Powder Bed Fusion Additive Manufacturing
Multi-laser Processing Strategies for High Integrity Component Manufacture
Multi-Physics Modeling Of Single Track Scanning In Selective Laser Melting: Powder Compaction Effect
Multi-scale FEA Modeling and Experimental Validation of Laser Powder Bed Fusion
Multi-scale Modeling of Selective Laser Melting of Inconel 718
Multimaterial Aerosol Jet Printing of Passive Circuit Elements
Multiple Collaborative Printing Heads in FDM: The Issues in Process Planning
Multiscale Topology Optimization and Fabrication Framework for Laminated Composites
Nanoparticle Bed Deposition by Slot Die Coating for Microscale Selective Laser Sintering Applications
NASA EPDC Additive Manufacturing Badge Development
NASA Sounding Rocket Additive Manufacturing Payload
Near-Field Electrospinning of a Polymer Bioactive Glass Composite
NEW PRESENTATION: Absorptivity Measurements in Laser Powder-bed Fusion Additive Manufacturing: Laser Parameters and Materials Dependence
Next-generation Fibre-reinforced Lightweight Structures for Additive Manufacturing
Non-equilibrium Phase Field Model Using Thermodynamics Data Estimated by Machine Learning for Additive Manufacturing Solidification
Nondestructive MicroCT Inspection of Additive Parts: How to Beat the Bottlenecks
Nonisothermal Welding in Fused Filament Fabrication
Nonlinear and Linearized Gray Box Models of Direct-write Printing Dynamics
Not Just Nylon... Improving the Range of Materials for High Speed Sintering
Novel Scanning Strategies to Replicate Processing Conditions across Laser Powder Bed and Directed Energy Deposition Processes
Numerical and Experimental Study of the Effect of Artificial Porosity in a Lattice Structure
Numerical Modeling of the Material Deposition and Contouring Precision in Fused Deposition Modeling
Numerical Prediction of Fracture in FDM Printed Parts
Numerical Prediction of the Porosity of Parts Fabricated with Fused Deposition Modeling
Omni-directional Cladding for Hybrid Layered Manufacturing
On-line In-process Cryogenic Cooling of Ti64 during Wire + Arc Additive Manufacturing to Increase Productivity
On AM Spreading Process Maps Obtained Using Polydispersed Particle Modeling and Machine Learning
On Demand Direct-write 3D Printing of Visible Light Crosslinkable GelMA Soft Tissue Scaffolds Using an Iterative Learning Control Method
On the Influence of Thermal Lensing during Selective Laser Melting of Metals
On the Nature of Stochastic Process Anomalies
Opportunities for Additive Manufacturing within Quantum Technologies
Optimization of Inert Gas Flow inside Laser Powder-bed Fusion Chamber with Computational Fluid Dynamics
Optimization of Optical Permeability of Powder Bed in Low-temperature Laser Sintering Process
Optimizing Process Parameters to Binder Jet Oxide Ceramics
Optimizing the Tensile Strength for 3D printed PLA Parts
Optimizing Topology and Toolpath via Multi-axis Material Extrusion
Overview of Sandia’s Born Qualified Project
Parallel Two-photon Lithography with Sub-diffraction Voxel Shaping
Part Decompositions for 3+2 5-Axis Hybrid Manufacturing
Particle Encapsulation to Increase Powder Sinterability and Part Strength in Ceramic Binder Jetting Additive Manufacturing
Particle Scale Melt Modeling of Selective Laser Melting with Uncertainty Quantification
Path Planning for Glass Laser Additive Manufacturing
PEEK High Performance Fused Deposition Modeling Manufacturing with Laser In-situ Heat Treatment
Photopolymer Formulation to Maximize the Resolution and Quality of Microarchitectures Fabricated Using Digital Light Processing-based 3D Printing
Physics-based Support Structure Design Optimization via Fast Process Simulation and Lattice Structure Optimization
Pick and Place Robotic Actuator for Big Area Additive Manufacturing
Potentials and Challenges of Multi-material Processing by Laser-based Powder Bed Fusion
Powder Bed Modeling Big and Small: Simulating Microstructural Evolution from a Single Bead to (Closer to) the Part Scale
Precast Concrete Molds Fabricated with Big Area Additive Manufacturing
Precision Enhancement of 3D Printing via In Situ Metrology
Predictive Iterative Learning Control with Data-Driven Model for Optimal Laser Power in Selective Laser Sintering
Primary Processing Parameters and Porosity Development
Printing Orientation and How Implicit It Is
Processing of High Performance Fluoropolymers by Laser Sintering
Processing Parameter and Transient Effects in Additive Manufacturing of Invar 36
Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process
Qualification of Large Scale Directed Energy Deposition Components - Challenges and Outlook
Quantifying the Effect of Embedded Component Orientation on Flexural Properties in Additively Manufactured Structures
Quantifying the Effects of Varied Laser Scan Velocity on Part Quality in Selective Laser Melting Process
Quantifying Uncertainty in Laser Powder Bed Fusion Additive Manufacturing Models and Simulations
Real-time Detection of Build Failures in Thin-wall Structures in Laser Powder Bed Fusion
Real-time Pyrometer Feedback and Control in Metal Powder Bed Fusion
Real-time Quality Monitoring of Construction-scale 3D Printing (Contour Crafting)
Real Time Monitoring of Additive Manufacturing Processes Using High-speed Synchrotron X-ray Imaging
Realtime Control-oriented Modeling and Disturbance Parameterization for Smart and Reliable Powder Bed Fusion Additive Manufacturing
Recyclability of 304L Stainless Steel in the Selective Laser Melting Process
Reinforcement Learning for Generating Toolpaths in Additive Manufacturing
Relationship between Defects Population and Tensile Properties of Inconel 625 Alloy
Research on 3D Scanning for Remanufacturing Automation Using Additive Manufacturing
Research on Relationship between Depth of Fusion and Process Parameters in Low-temperature Laser Sintering Process
Residual Stress Reduction of Laser Powder Bed Fusion Processes Using In Situ Laser Diode Annealing
Residual Stress Simulations and Comparison against Experimental Measurements for Additively Manufactured Ti-6Al-4V
Rheological and Heat Transfer Effects in Fused Filament Fabrication Additive Manufacturing
Rheological, In Situ Printability and Cell Viability Analysis of Hydrogels for Muscle Tissue Engineering
Scaling Models for Laser Powder Bed Fusion Process Mapping: A Comparison Using Iron, Invar 36 and SS316L
Selective Laser Melting of Al6061 Alloy: Processing, Microstructure, and Mechanical Properties
Selective Laser Melting of Nickel Based Metal Matrix Nanocomposite Powder Produced by Electroless Plating
Simulation of the Thermal Behavior and Analysis of Solidification Process during Selective Laser Melting of Alumina
Size and Topology Effects on Fracture Behavior of Cellular Structures
Slurry-based Laser Sintering of Alumina Ceramics
Small-scale Characterization of Additively Manufactured Aluminum Alloys through Depth-sensing Indentation
Smoothed Particle Hydrodynamics Simulation of Additive Friction Stir Manufacturing of Aluminum Alloy 6061
Solidification Simulation of Direct Energy Deposition Process by Multi-phase Field Method Coupled with Thermal Analysis
Spatially Resolved Acoustic Spectroscopy for Additive Manufacturing: Towards Online Inspection
Stereolithography-Based Manufacturing of Molds for Directionally Solidified Castings
Stress Corrosion Cracking Behavior of Additively Manufactured Ti-6Al-4V Parts Fabricated Using New and Heavily Recycled Powder
Structural Health Monitoring (SHM) of 3D Printed Structures
Structurally Intelligent 3D Layer Generation for Active-Z Printing
Study of Charge Effect during Melt Electrospinning Writing Process
Surface Finish and Identification of Defects through Complementary use of Optical Metrology and X-ray Computed Tomography in Laser Powder Bed Fusion Additive Manufacturing
Surface Modification of Polymer Particles for Laser Sintering Applications
Surface Roughness Optimization of Parts Produced Using Binder Jet 3D Printing
Tactile Sensor for Shear and Pressure Sensing Manufactured through Additive Manufacturing of Silicone Elastomer
Technology Integration into Existing Companies
Tensile and Shear Strength of ABS from Hybrid Additive Manufacturing by Fused Filament Fabrication (FFF) and Shot Peening (SP)
Tensile Strength of Interfaces in Multi-material 3D-printed Parts
Texture Development and Texture Dependant Mechanical Properties of Stainless Steel 316L Produced by Laser Powder Bed Fusion Process
The Behavior of Phase Transformation for Ti-Ta Alloy in Laser Powder-bed Fusion
The Effect of Crystallinity on Mechanical Properties of High Temperature Semi-crystalline Printed Thermoplastics
The Effect of Inkjetted Nanoparticles on Metal Part Properties in Binder Jetting Additive Manufacturing
The Effect of Processing Parameter on Zirconium Modified Al-Cu-Mg Alloys Fabricated by Selective Laser Melting
The effect of shear-induced fiber alignment on viscosity for 3D printing of reinforced polymers
The Effects of Post-AM Annealing Treatments on AM316L Stainless Steel
The Influence of Build Parameters on the Compressive Properties of Selective Laser Melted 304L Stainless Steel
The Influence of Contour Scanning Parameters and Strategy on Selective Laser Sintering PA613 Build Part Properties
The Influence of Defects on the Performance of 316L Stainless Steel from Metal Laser Powder Bed Fusion
The Mechanical Behavior of AISI H13 Hot-work Tool Steel Processed by Selective Laser Melting under Tensile Stress
The recycling of E-Waste ABS plastics by melt extrusion and 3D printing using solar powered devices as a transformative tool for humanitarian aid
The Role of Cellular Structure on Mechanical Properties in Additively Manufactured Metals
The Sidewall Inclination Angle’s Influence on Repairing V-shape Defect in Ti6Al4V Metallic Components with Direct Energy Deposition Process
Theory and Methodology for High-performance Material-extrusion Additive Manufacturing under the Guidance of Force-flow
Thermal Diffusivity Response in MatEx: From FFF to BAAM
Thermal Management of Li-ion Batteries Using Phase Change Composite Fabricated by Selective Laser Sintering
Three-dimensional Characterization of Porosity Defects and their Correlation to Mechanical Properties in AM 316L Stainless Steel
Tool-path Generation for Hybrid Additive Manufacturing
Topology-aware Routing of Electric Wires in FDM-printed Objects
Topology Optimisation of Additively Manufactured Lattice beams for three-point bending test
Topology Optimization for Sandwich Structures with Continuous-CF/PA6I-PA6T Laminates as Skin Layers and PA6 or Short-CF/PA6 as a Core Layer
Topology Optimized Heat Transfer Using the Example of an Electronic Housing
Toward Data- rich Additive Manufacturing
Toward Location-specific Control of Mechanical Properties in Ti-6Al-4V via Electron Beam Melting Process
Towards an Open-source, Preprocessing Framework for Simulating Material Deposition for a Directed Energy Deposition Process
Towards High Build Rates - Combining Different Layer Thicknesses within One Part in Selective Laser Melting of 316L Steel
Transient Dynamics of Powder Spattering in Laser Powder Bed Fusion Additive Manufacturing Process Revealed by In-situ High-speed High-energy X-ray Imaging
Transport Phenomena and Grain Structure Evolution during Laser Assisted Additive Manufacturing
Transport Properties of Laser Processed Thermoelectric Materials
Tuning Nanoparticle Suspension Viscoelasticity for Multimaterial 3D Printing of Silica-Titania Glass
Two-dimensional Characterization of Window Contamination in Selective Laser Sintering
Uncertainty Quantification and the Additive Manufacturing Digital Twin
Understanding Distortion in Material Jetting Process
Understanding hatch-dependent part properties in SLS
Understanding the Correlation between Mechanical Properties and Porosity Formation of 3D-printed TNM-B1 by Means of High-performance Computer Tomography
Understanding the Impact of Thermal Constraints on Residual Stress in 3D Metal Printed Parts
Understanding the Process of Adopting Selective Laser Melting of Metallic Materials
Use of SWIR Imaging to Monitor Layer-to-layer Part Quality during SLM of 304L Stainless Steel
Using Additive Manufacturing in the Development and Manufacture of a Fixed Wing Drone
Using Autoencoded Voxel Patterns To Predict Part Mass, Required Support Material, and Build Time
Using Big Area Additive Manufacturing to Directly Manufacture a Boat Hull Mold
Using Fillers to Improve Printability of a Water Soluble Semi-crystalline Polymer for Material Extrusion Additive Manufacturing
Using Post-tensioning in Large Scale Additive Parts for Load Bearing Structures
Utilising Additive Manufacturing Techniques for the Design and Manufacture of an Airship
UV-assisted Direct Write of Polymer-bonded Permanent Magnets
Viscosity Control of Pseudo-plastic Polymer Mixtures for Applications in Additive Manufacturing
Visualisation and MHD Modelling of Shielding Gas Flow and Coverage in WAAM
Visualization and Measurement with Dynamic X-ray Radiography of Laser Melting in 3D Printing
Volume Effects on the Fatigue Behavior of Additively Manufactured Ti-6Al-4V Parts
Volumetric Sintering of a Selectively Doped Polymer Using RF Radiation
Weakly Coupled Thermomechanical Topology Optimization and Large-scale Polymer Deposition
What Insights into Additively Manufactured Materials will Exascale Computing Enable?
Where Next for AM Simulation?
X-ray and Computed Tomography as a Tool for Quality Assurance, Process Optimization and Metrology Inspections in the Field of Additive Manufacturing
X-ray Tomographic Imaging of 3D Printed Cellular Materials during In Situ Mechanical Deformation
Z-Pinning Approach for Reducing Mechanical Anisotropy of 3D Printed Parts

Questions about ProgramMaster? Contact