ProgramMaster Logo
Conference Tools for 2018 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2018 TMS Annual Meeting & Exhibition
Symposium Metal-Matrix Composites Innovations, Advances and Applications: An SMD Symposium in Honor of William C. Harrigan, Jr.
Presentation Title Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings
Author(s) Olgun Yılmaz, Metehan Erdoğan, İshak Karakaya
On-Site Speaker (Planned) Olgun Yılmaz
Abstract Scope Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al<SUB>2</SUB>O<SUB>3</SUB> particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and the amount of Al<SUB>2</SUB>O<SUB>3</SUB> powder in the electrolyte on the mechanical and tribological properties like hardness, friction coefficient, wear rate, and the amount of deposited Al<SUB>2</SUB>O<SUB>3</SUB> were investigated.
Proceedings Inclusion? Planned: None Selected

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Aluminum Matrix Composites 1970 to 2017
An Engineered Magnesium Alloy Nanocomposite: Mechanisms Governing Microstructural Development and Mechanical Properties
Bio-inspired, Graphene/Metal-oxide Reinforced Metal-matrix Composites (Invited)
Bioinspired Al Composites Reinforced by In Situ Formed Al3Ni and Al3Ti
Characterization in Drilling Process of Carbon Fiber Reinforced Plastic Composite Materials
Commercial-ready Large Scale Manufacturing of Light-weight Aluminum Metal Matrix Composite
Designing New Self-healing Metallic Materials and Self-healing Metal Matrix Composites
Development and Characterization of In-situ Al-TiC Composites Prepared by Pneumatic Powder Injection Route
Development of an electroless plating process for multi-wall carbon nanotubes (MWCNTs) to improve their dispersion and wettability in molten aluminum
Effect of Matrix Properties and Sliding Counterface on the Wear Behavior of Magnesium Alloy-based Metal Matrix Composites
Experimental Optimization of Dry Sliding Wear Behavior of Titanium Matrix Composites Using Taguchi Methods
Fabrication of Carbon/Aluminum Metal Matrix Composites via Combination of Different Carbon Addition Processes and Friction Stir Welding
Fatigue Properties of Titanium Metal Matrix Composites at Elevated Temperatures and under Different Environmental Conditions
Fracture and Fatigue of Particulate Composites, Nano-composites, and Toughening Mechanisms
Fundamental Issues of Reactive Wetting in Carbon Based Liquid Copper Alloys
Hierarchically Engineered MMC's, a History of MMC Research at Powdermet Inc.
High-entropy-alloy Composites: Microstructures and Mechanical Behavior
In-situ TiB Reinforced Titanium Matrix Composites with a Network-woven Architecture Design
Influence of Boron to the Creep Behavior of Particle Reinforced Aluminum Matrix Composites (AMCs)
Influence of Graphene nanoplatelet reinforcements on Microstructural Development and Wear Behavior of An Aluminum Alloy Nanocomposite
Influence of Interface Microstructure on Mechanical Properties of Metal/Ceramic Bonding in Cu-SiC and Cu-Al2O3 Composites
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings
Magnetically Induced Cavitation for the Dispersion of Particles in Liquid Metals
Mechanisms of Solid State Interactions of Titanium Nitride and Titanium Carbide Particles in a Secondary Hardenable Steel Matrix
Metal Matrix Composites – from Science to Technological Significance
Microstructure and Mechanical Behavior of Cryomilled Al-Mg Composites Reinforced with Nanometric Yttria Partially Stabilized Zirconia
Microstructures and Thermal Properties of Ag-carbon/Cu Composite Fabricated by Friction Stir Processing
Model-based Algorithm for Damage Detection in Piezoelectric Fiber-based Composites
Nanostructured Aluminum Alloys and their Composites via Cryomilling
Strengthening Behavior of Ti/MWCNTs Composites with Modified Interfacial Structure by Utilizing Mechanical Milling
Study on Hot Deformation Behavior and Processing Map of 20vol.%Al18B4O33w/2024 Composites
Synthesis and Microstructural Development of Particulate Reinforced Metal-matrix Composites Using the Technique of Spray Atomization and Deposition
Tensile Behavior of Hot Isostatically Pressed TiC-SKD11 Composite and Characteristic Analysis
The Effect of Si on the Interface Reaction of Ti3SiC2/Al Composites
The Synthesis and Processing of Light Weight Low Cost and High Performance Structural Aluminum Metal Matrix Composite Foam

Questions about ProgramMaster? Contact programming@programmaster.org