About this Abstract |
Meeting |
2019 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2019)
|
Symposium
|
2019 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2019)
|
Presentation Title |
Tensile and Compression Test for Specimens Developed Using an Algorithm of Path Optimization |
Author(s) |
Julian I. Aguilar-Duque, Cesar Omar Balderrama-Armendariz, Juan Luis Hernández-Arellano, Liliana Avelar |
On-Site Speaker (Planned) |
Julian I. Aguilar-Duque |
Abstract Scope |
The propose of this research is to determine the tensile properties and compressive properties in specimens designed with the route optimization algorithm printed with Fused Filament Fabrication technology. Two types of specimens have been developed, the type A using CURAŽ software and the type B, modifying the G code proposed by CURAŽ with the algorithm of Salesman Traveling Problem to optimize the path of the extruder. The manufacture of the specimens was carried out with 3D Cube equipment and PLA material. The tensile test was developed using ASM D638-14 method and ASTM D695-15 for a compression test. Results expose a reduction of 4.5% in the standard time of printing. No significant differences were found in tensile and compressive strength between type A and B specimens. |
Proceedings Inclusion? |
Definite: Post-meeting proceedings |