50 Year’s Research and Development on Metal Forming and Joining |
A Brief Review on Theoretical Aspects of Bar Straightening with Recent Developments in its Modelling, Simulation, Control System and Stabilisation |
A Computational Study on the Producible Rolling Thickness in Ultra-thin Strip Rolling |
A Contact and Friction Model for Forming of Galvanized Steel Sheet Based on Fractal Theory |
A Critical Review on the CPFEM Models Accounting for Gain Boundary Hardening Effect and Some Developments toward Simplification of the Wagoner Super-Dislocations (SD) Model |
A Fast Computational Model for the Local Stress Distribution and Mechanical and Thermal Work Roll Deformations with Effects on Strip Profile and Flatness during Hot Rolling of Strip in Four-high Mills |
A FE Billet Model and A Spring-mass-damper Press Model for the Simulation of Dynamic Forging Process: Application to a Screw Press |
A New Approach for the Production of Burr-free Sheet Metal Components Having Significantly Increased Residual Formability |
A New Criterion for Triclinic-asymmetric Yielding: Implicitly Describing Anisotropy and Distortional Asymmetry |
A New Non-destructive Testing Method Applied to Clinching |
A New Test Method for Sheet Metal Deformation Subjected to Tension under Cyclic Bending and Compression (TCBC) |
A Novel Approach to Predicting Surface Properties Generated during Metal Forming Processes |
A Novel Flexible Skew Rolling Process for Step Shafts: Feasibility Study |
A Plasticity Framework for Forming Applications |
A Predictive Strain-gradient Treatment with No Undetermined Constants or Length Scales |
A Study of the Forming Quality of Magnesium Alloy Cylindrical Parts with Inner Ribs by Induction-heating Assisted Spinning |
A Vision of Numerically Controlled, Autonomous Manufacturing and Metal Forming |
Accurate Mapping of Thermal Camera Measurements on Planar Deformations |
Accurate Modelling of Flow Stress of AISI1025 at Room Temperature and Its Application to Precision Forging Simulation |
Achieving an Interference Fit between Two Rings during Composite Ring Rolling |
Adding Value by Advancing Metal Forming |
Adjusting Product Properties by Deliberate Induction of Residual Stresses in Single Point Incremental Forming |
Advanced Design of Work Roll Contours for Different Roll Mill Types |
Advancements in the Simulation of Magnetic Pulse Forming Processes with FORGE(R) |
Advances and Challenges in Computational Modeling of Impact Welding Process |
Advancing the Accuracy of Computational Models for Double-sided Incremental Forming |
An Application of Homogeneous Anisotropic Hardening Model to the Prestrained Hole-expansion Experiment |
An Extended Ductile Fracture Prediction Model Considering Hydrostatic Stress and Maximum Shear Stress |
An Extended GTN Ductile Fracture Model for a Broad Range of Stress States |
An Improved Hot Stamping Process for Titanium Alloys by Fast Heating |
An Investigation on Formability of Ti6Al4V Alloy in the Three-layer Sheet Hot Stamping Process |
Analysis of Creep Behavior of Magnesium Alloy Sheet (AZ31B) in Warm Forming |
Analysis of Cross-hardening by High Resolution Orientation Imaging |
Analysis of Cylindrically and Spherically Embossed Flux Barriers in Non-oriented Electrical Steel |
Analysis of Influencing Factors on the Achievability of Bistable Fully Closed Shells by Semi-analytical Modelling |
Analysis of Material Work Hardening and Fracture Strains for Sheet Metal Stamping Processes |
Analysis of Orientation Behavior of Plate-like Particles in Differential Speed Powder Rolling |
Analysis of the Influence of Joining Partners on the Residual Stress Distribution in Assembled Shafts |
Analysis of the Thermomechanical Flow Behavior of Carburized Sheet Metal in Hot Stamping |
Analysis of Tube Spinning |
Analysis of Work Hardening and Tribological Changes after a Gap Controlled Drawbead Passage |
Anisotropic Ductile Fracture Estimation of Diagonal Cracks in Flange-shaped Parts |
Anisotropic Plasticity and Ductile Fracture of Titanium Alloy Sheet at Elevated Temperature: Characterization and Modeling |
Applicability of ALE Based FEM Methods in the Numerical Modeling of 3D Fine Blanking Processes |
Application of the Nondestructive Evaluation (NDE) Method to Evaluate the Sheared Edge Quality and Edge Cracking |
Assessment of Calibration Strategies and Model Predictions for Damage in Formed Components |
Augmentation of Plasma-based Impulse Generation with Rapid Chemical Reactions |
Bulk Microforming From Sheet Metal - A Promising Approach for the Mass Production of Cold Formed Metallic Micro Parts |
Calibration and Verification of Stress-strain Curve in High Strain Region of Mild Steel Sheet |
Characterisation of Anisotropic Material Behaviour |
Co-extrusion of Compound-cast AA7075/6060 Bilayer Billets at Various Temperatures |
Combined Computed Tomography and Numerical Modeling for the Analysis of Bending of Additively Manufactured Cellular Sheets |
Comparison of Linear Regression and Neural Networks as Surrogates for Sensor Modeling on a Deep Drawn Part |
Comparison on the Processing of Height Deviations of Disks from FEM and Real Rollings in Radial-Axial Ring Rolling |
Complementary Methods for Assessment of Residual Stress Fields Induced by Rotary Swaging of Steel Bars |
Compression of C/Thermoplastic Printed Composite; Shaping Parameters and Material Health |
Computational Modeling of Magnetic Pulse Dissimilar Alloys Welding: Aluminum Alloy 6082-T6 and HC420LA Steel |
Computer Aided Modeling of the Hot Forming Staking Process Based on Experimental Data |
Constitutive Law Parameter Identification for Hot Forging Using Compression Experiments on Forging Presses |
Constitutive Model and Plate Forging Ability of 5052 Aluminum Alloy under Different Temperatures |
Control Theory for High End Press Brake |
Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming |
Data Preparation in the Digital Material Representation Based 3D Cellular Automata Model of Static Recrystallization |
Decoupling of Adverse Effect of Inter-roll Thrust Force on Steering Control during Strip Rolling |
Deformation Analysis in Ultrasonic-assisted Multi-stage Incremental Sheet Forming |
Deformation Mechanisms in Tool-workpiece Asperity Contact in Metal Forming |
Deforming Behavior in Magnetic Pressure Parallel Seam Welding |
Deforming Nanometric Volumes at Large Shear Strains by AFM Scratching |
Dependence of Mesoscale Structure of Drawn High Carbon Steel Wire on Wire Diameter |
Descriptions of Several Cyclic Plasticity Phenomena Based on Y-U Model: Elastic-plastic Transition, Closure of Stress-strain Loop and Ratcheting |
Design of a New Cruciform-like Specimen for Combined Tension and Shear of Metal Sheets |
Development and Implementation of Static Recrystallization Model of 6XXX Aluminum Alloy Using Industrial Experiments |
Development of a New Printing Method Using Soft Material Tools |
Development of Adhesion Preventing Method during Deep-drawing of Titanium Alloy Sheets |
Development of Antiloosening Bolts Based on Innovative Double Thread Mechanism |
Development of Automatic Design System for Closed Die Forging Process of Disk-shaped Products |
Development of Criteria for Strain Induced Oxide Layer Fracture during Cold Rolling of Aluminum |
Development of Mechanical Cards for Finite Element Analysis of Mild Steels by Parameter Optimization |
Development of Oil-type Lubricants for Cold Forging Using Phase Transition Behavior Under High-pressure Conditions |
Development of Warm Press Forming Process Method of Ti-6Al-4V Alloy Sheet |
Dynamic Recrystallization Behaviors of 5083 Aluminum Alloys with Different Initial Microstructures under Hot Compression |
Effect of Anisotropy Evolution on Several Sheet Metal Forming Processes |
Effect of Bending Intensity on Straightness in Spinner Straightener |
Effect of Blanking on Magnetic and Mechanical Properties of Non-oriented Electrical Steel |
Effect of Delivery Angle on Longitudinal Buckling in Temper Rolling of Thin Steel Strips |
Effect of Expansion Ratio on Formability in Tube Drawing with Diameter Expansion |
Effect of Machining Induced Microstructure Changes on the Edge Formability of Titanium Alloys at Room Temperature |
Effect of Production Rate on Lubrication Performance in Combined Forward-Can and Backward-Can Cold Extrusion Test |
Effect of Short Pulsed-current on Stress Relaxation in Uniaxial Tensile Test |
Effects of Press Ram Vibrations on the Production Quality |
Effects of Servo Press Forming on Various Strain Path Failures |
Elastoplastic Finite Element Analysis of Multi-body Processes for Joining Mechanical Parts |
Energy-dependent Surface Integrity of Stainless Steel AISI 304 after Robot-based Machine Hammer Peening |
Enhancing Tool Life by Manipulating the Punch & Die Elastic Strain Field during Forging |
Estimation and Prevention of Strain Localization in Shear Tests |
Evaluating the Reliability of a Nondestructive Evaluation (NDE) Tool to Measure the Incoming Sheet Mechanical Properties |
Evaluation of isotropic and anisotropic constitutive models on plasticity prediction of AA7075 extruded tube under Tension-Tension and Tension-Compression |
Evaluation of Lubricant Performance for Thick Sheet Ironing Process by Ball Ironing Test |
Evaluationg of Press Forming Technique for Bent Automotive Body Parts Using In-plane Shear Deformation |
Experimental Analysis on Granular Media Based Tube Forming with Active Axial Feed |
Experimental and Numerical Investigations into the Influence of the Process Parameters during the Deep Drawing of Fiber Metal Laminates |
Experimental and Numerical Investigations on the Development and Stability of Residual Stresses Arising from Hot Forming Processes |
Experimental Implementation of SS 316L Cruciform Testing to Achieve Various Deformation Paths |
Experimental Investigation of Different WAAM (Wire-Arc Additive Manufacturing) Processes and Their Influence on the Component Properties and Formability |
Experimental Study and Modelling of Stress Relaxation Ageing Behaviour and Post-form Mechanical Properties in Creep Age Forming of Al-Zn-Mg Alloy |
Experimental Study of Asymmetric Rolling of Aluminum Alloys |
Experimental Study on Texture Evolution of Mg-Y Magnesium Alloy in Extrusion |
Experimental Study on the In-plane Torsion Test for Sheet Metal |
Experimental Study on Uniaxial Strain Cyclic Behavior of GS-20Mn5 |
Exploring the Fragmentation of Surface Films during Solid State Welding |
Extrusion Technology of High-performance Aluminum Alloy Profiles with Large Complex Section |
Fabrication of NiAl/TiAl-based Gradient Alloys by Additive Sintering |
Fatigue Characteristics and Failure Mechanism of Self-piercing Riveting DP590 and AA6061 Plates |
FE-based Investigation on the Influence of Inhomogeneously Heated Billets on Subsequent Forging Processes |
FEM Analysis on Multi-pass Wiredrawing Process of Ultra-fine Steel Wire: Investigation on Stress, Strain and Hardness |
Fine-piercing of Electrical Steel Sheets by Edge-sharpened Diamond-punch |
Finite Element Analysis of Die Quenching 22MnB5 Steel Sheets |
Finite Element Simulation and Punch Design for Tube Hydro-piercing |
Finite Element Simulation of Edge Fracture by Mapping the Shear-induced Ductile Damage into Hole-expansion Simulation |
Flexible Manufacturing of Concave-convex Parts by Incremental Sheet Forming with Active Medium |
Flow Behavior and Processing Map of a Nickel-based Superalloy during Hot Plastic Deformation Process |
Fluidity of the Wood Composite Combined with Natural Binder on Injection Molding |
Formability Analysis of a Local Heat-treated Aluminium Alloy Thin-walled Tube |
Formability Improvements at Room Temperature of AA5754-H32 via Continuous Bending under Tension (CBT) and Pre-forming Heat Treatment |
Formability of Functional Corrugated Cup |
Formation of Residual Stresses in Austenitic Stainless Steels by Infeed and Recess Rotary Swaging |
Forming Limit Results Comparing the Bragard Technique with a Statistical, Deformation-history Analysis |
Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-forming |
Forming of PMMA Sheets by Lap Incremental Forming with Local Friction Heating |
Fretting Damage and Fatigue Property Analysis of Self-piercing Riveted Joints of AA5052 Aluminium Alloy |
Friction and Thermal Insulation: Influence of Oxide Scale on Hot Forging Sequences |
Friction Based Solid State Recycling: An Industry-ready Technology? |
Friction Law in Cold Metal Forming |
Friction Stir Welding Applied in Joining of Armor Steel |
From Bridge to Bumper – Utilization of Pre-stressing during Manufacturing of Hybrid Sheet Metal Structures |
Full-field strain measurement in multi-stage shear cutting: High-speed camera setup and variational motion estimation |
Fundamentals of Continuous Helicoid Auger Flighting Rolling - Deformation Mechanics, Kinematics and Applications |
Galling-free Micro-forging of Titanium Wire with High Reduction in Thickness by Beta-SiC Dies |
General Step Reduction and Enlargement Method for Knowledge-based Process Planning of Totally Non-axisymmetric Forged Products with Blanking and Punching |
Grain Size Effect on Formability in Electromagnetically-assisted Micro-bulging of Pure Titanium Sheet |
Grain Size Effect on the Ductile Fracture of Steel in Hot Deformation |
Hardening/Softening Characteristics of a TRIP-assisted Duplex Stainless Steel under Cyclic Deformation |
Heterogeneous Deformation in (α+β) Titanium Alloys: Iin-situ Explorations of Strain Localization and Its Governing Deformation Micro-events |
High-speed Material Characterization Using an Instrumented Forging Hammer |
High-temperature Properties of Hot-work Tool Steel (AISI H13) Deposited via Direct Energy Deposition |
Hole Expansion Simulation of Steel Sheet Considering Differential Hardening |
Hot Cutting of Press-hardened Parts in Different Heat Treatment Regimes |
Hot Deformation Behavior and Constitutive Modeling of a Novel Ni-based Superalloy |
Hot Ring Rolling and Cold Expanding Strengthening of Mn18Cr18N Thick-wall Hollow Ingots |
Hydro-mechanical Deep Drawing of Locally Solution Treated Aluminum Alloy Sheets |
Impact of the Temperature Field of a C38 Steel Slug on its Thixoforging: Experiments and Simulations |
In-plane Stretch-bending Test for Determination of Large-strain Workhardening and Fracture of Sheet Metals |
In Search of the Perfect Sheet Metal Forming Tribometer |
Incremental Collar Forming Process for the Manufacturing of Branched Tubes and Pipes |
Influence of Axial Feed-rate on Shape and Thickness Changes during Multi-pass Tube Spinning: Experiments and Modelling |
Influence of Forming Conditions on Metal Flow and Lubrication in Cold Backward-cup Extrusion |
Influence of Material Delivery Condition on Residual Stresses and Part Properties during Forward Rod Extrusion |
Influence of Precoating on the Decarburization of the Surface Layer of Forged Parts during the Hot Die Forging Process |
Influence of Shear Cutting Process Parameters on the Residual Stress State and the Fatigue Strength of Gears |
Influence of Specimen Preparation Methods on the Mechanical Properties and Superplastic Behavior of AA5083 Sheets |
Influence of the Quenching Rate and Natural Ageing Duration on the Formability and Mechanical Properties of EN AW-7075 |
Influence of Ultrasonic-assistance on the Forming Limits of Steel |
Innovations through Collaborative Research |
Innovative Simulation Strategy for the Mastering of Tribological Surface Transformations |
Introduction of a New Method for Continuous Aluminum Hot Extrusion |
Investigating Plastic Anisotropy of Al7079 Using Crystal Plasticity Simulations |
Investigation of a Novel Constructive Hot Ring Rolling Process for Double Metal Composite Ring |
Investigation of an Integrated Process for Bending and Cross Section Forming of Tubular Lightweight Parts Based on a Working Media Made of Materials with High Plasticity |
Investigation of Effects of Part Features in Single Point Incremental Forming of Narrow Channels |
Investigation of Failure Mechanisms of Cemented Carbide Fine Blanking Punches by Means of Process Forces and Acoustic Emission |
Investigation of Forward–Backward-Radial Extrusion Process of Aluminum Alloy Wheel Hub |
Investigation of Machine Learning Models for a Time Series Classification Task in Radial-axial Ring Rolling |
Investigation on Springback Behavior of Multi-intersecting High Stiffened Structure in Die Forming |
Investigation on the Whole Forming Process of Super-large Flat Ring |
Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis – A New Temperature Compensation Method |
Investigations on Dynamic Characteristics of a Mechanical Press Considering Both Translational Clearance Joint and Lubrication Effect |
Local Microscopic and Integral Macroscopic Analysis of Magnetic Pulse Welds and Deformations for Dissimilar Metal Joints |
Localized Contact Pressure of Blankholder for Stamping Irregular Sheet Parts by Configuring the Height of the Supporting Elements |
Machine Learning Based Prediction and Compensation of Springback for Tube Bending |
Manufacturing of Tailored Blanks with Pre-shaped Involute Gearings by Using a Flexible Rolling Process and Its Application in a Sheet-bulk Metal Forming Process |
Manufacturing Processes of Non-metallic Materials |
Mathematical Model and Quantitative Analysis of Residual Stress Hole during Laser Shock Peening |
Mechanical Properties of Aluminum-stainless Steel Bimetal Composite Fabricated by Extrusion Process |
Metal Foils for Bipolar Plates – Correlation of Initial Grain Size and Forming Behavior of 316L |
Methods for Increasing the Durability of Forging Tools - Comprehension Review and Outlook |
Microstructural Influences on Grain Boundary Sliding in High Purity Aluminum |
Microstructure Evolution during Isothermal Forging of 7A85 Aluminum Aviation Component |
Microstructure Informed Deformation and Fracture Model for High-strength Steels |
Multi-objective Optimization of Elbow-bar Transmission Mechanism Based on Virtual Prototyping |
Neural Network Surrogates Model for Metals Undergoing Yield Point Phenomena within Finite Element Analysis |
New Generation Press Hardening Steels with Tensile Strength of 1.7-2.0GPa and Enhanced Bendability |
New Methods for Fracture Detection of Automotive Steels |
Non-isothermal modeling of static recrystallization in hydroformed steel tube using a coupled Cellular Automata and Finite Element model |
Nonlinearity of the Crystal Yield Function in the Rate-independent Crystal Plasticity and Its Effect on the Evolution of Anisotropy |
Novel Roll Bonded Stainless Steel / Boron-steel Multilayer under Hot Stamping Conditions |
Numerical and Experimental Investigations on Riveting Assembly Processing Parameters of Hub Bearing Unit |
Numerical Modeling of Ductile Damage during Metal Forming: State of the Art and Future Challenges |
Numerical Modelling and Deformation Mechanics of the English Wheel Process |
Numerical Modelling of the Flow Forming Process: Computation Time Optimization and Accuracy Analysis |
Numerical Simulation of Pipe Bending Supported by Hydraulic Pressure for Manufacturing Butt-welding Fittings |
On Edge Crack Initiation of an Aluminum Sheet Metal |
On Sampling Discrete Orientations for Texture Representation in Aggregates with Varying Grain Size |
On the Characterization of Fracture Loci in Thin-walled Tube Forming |
On the Convexity Bound of the Generalized Drucker's Yield Function CB2001 for Orthotropic Sheets |
On the Determination of the Forming Limits by Necking and Fracture of Polycarbonate Sheet |
On the Geometrical Accuracy in Incremental Sheet Forming |
On the Newly Proposed Shear Constraint for Orthotropic Plasticity Modeling of Sheet Metals |
On the Potential of Machine Learning Algorithms to Predict the Plasticity of Sheet Metal |
Open-die Forging of Copper Cone |
Optimization of Lattice Structures for Additively Manufactured Interpenetrating Composites |
Optimization of Open-die Forging Using Fast Models for Strain, Temperature and Grain Size in the Context of an Assistance System |
Oscillation-free Determination of Material Properties at High Strain Rate |
Penetrating Tool Friction Stir Incremental Forming Using Alternating Tool Path Direction |
Phase-field Modelling of Ductile Fracture to Describe Edge Conditions in Local Formability Studies |
PID Controller Integrated with FEM Model to Generate Boundary Conditions for Free Tube Bulging for Tubular Material Characterization |
Plastic and Fracture Characteristics of WE43 Mg Alloy Under Complex Stress States |
Plasticity and Ductile Fracture of Ultra-high Strength Steel Sheets under Complex Stress State: Experiments and Modeling |
Possibility of Shear Forging as the Third Basic Process of Cold Forging |
Pre-forging Shape Design Using Conformal Mapping Method |
Prediction on Microstructure of Large Scale Hot Forged Ni-based Super Alloy |
Predictive Model for the Strength of Self-piercing Riveted Joints |
Professor Ruan-An Extaodinary Pioneer within the Global Scientific Network Metal Forming |
Professor Ruan and the International Cold Forging Group (ICFG) |
Professor Z.R. Wang's Contributions to Metal Forming Theory, Technology and Education |
Prof. Xue-Yu Ruan and His Academic Life |
Prof. Yasuhisa Tozawa's Achievements in the Field of Metal Forming |
Pushing Forward the Limit of Transformation-induced Plasticity (TRIP) Effect: Nnew Strategies in Mechanically Metastable Alloy Design |
Recent Advances in Sheet and Tube Hydroforming |
Recent Advances on Modeling Plastic Deformation of Textured Metals with Applications to Metal Forming |
Recent Developments of Vaporizing Foil Actuator Technique for Manufacturing Applications |
Recent Investigations on Incremental Sheet Forming: From Fundamentals to Industrial Application Technologies |
Reducing Aluminum Extrusion Transverse Weld Process Scrap |
Relating Microstructure to Deformation in Al Alloys via Multiscale Electron Microscopy |
Relaxation Characteristics of Creasing Process of Scored Paperboard for Liquid Container |
Research of Press Forming of CFRTP under the Control of a Distribution of Temperature and Blank Holder Force |
Research Progress on Advanced Forming and Performance Strengthening of Complex Thin-walled Aluminum Alloy Components |
Residual Stresses in Hot Bulk Formed Parts – A Phenomenological Approach for the Austenite-to-Martensite Phase Transformation |
Rim Thickening of Disk-like Parts Using Spinning |
Robotic Roller Forming Process and Strategies to Eliminate Geometrical Defect of Edge Waves |
Roll Forming of Cup with Curved Rotary Profile |
Self-optimized, Intelligent Open Loop Controlled Steel Strip Straightening Machine for Advanced Formability |
Self-piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening |
Shaping of Sharp-edged Design Elements by Electromagnetic Forming |
Simulated Microstructure Effects on Macroscopic Mechanical Properties Based on Multiscale Crystal Plasticity |
Simulation of Cold Forging Processes Using a Mixed Isotropic-Kinematik Hardening Model |
Simulations of Grain Growth with Arbitrary Grain Boundary Energy |
Size Effect on Cyclic Deformation Behavior and Springback Prediction of Ultrathin Superalloy Sheet |
Spot Butt Friction Stir Welding of Thin Stainless Steel Sheets |
Statistical Analysis of Microscopic Strain Localization and Its Strain Level Dependence |
Strain-rate-sensitivity Calibration of Aluminum Alloy Sheet by Electromagnetic Flanging of Circular Hole |
Strain Hardening of AA5182-O Considering Strain Rate and Temperature Effect |
Strength Prediction Model for Line Pipe Steels Subject to Multiple Deformation Paths |
Stress-based Ductile Fracture Criterion for Nonlinear Strain Paths with Model Calibration |
Stress-relaxation Age Forming of A Component with Complex and Large Curvatures: Simulation and Manufacturing |
Study of Hydrogen Embrittlement Behavior of Hot-stamped Ultra-high Strength Steel |
Study of the Influence of the Mixed-grain Structure on the Microscopic Deformation Behavior of 316LN Steel |
Study on Complex Extrusion of Multi Billets: Evaluation of Mechanical Properties of Butt-joined Products and Analysis of Joining State |
Study on the Effect of Embossing on the Bending Properties of High Strength Sheet Metals |
Study on the Transferability of Rolling with Ordered Texturing Roll |
Surface Quality of Extruded Sidewall in Cold Backward Cup Extrusion with Low-frequency Torsional Oscillation |
Surrogate Modelling of Search Range in Polyhedron Flow Stress Model Identification with Inverse Analysis and Cylindrical Compression Test |
T8 Heat Treatment Effect on Wear Behavior and Microstructure of Cryo and RT Ecaped Al 6063 |
Temperature and Deformation Modeling for the Friction Stir Welding Process in AZ31 Magnesium Alloy |
Temperature Dependent Fracture Loci Of AZ31 Magnesium Alloy Sheets |
Testing Method of Anti-galling Ability of Lubrication Coatings in Multi-stage Cold Forging |
The Dieless Drawing Process for the Elongation of Ultrafine Copper and Brass Wire |
The Effect of Crystallographic Texture Gradients on the Mechanical Response of Aluminum Automotive Extrusions |
The Effect of Interface Cohesion on Layer Stability during Accumulative Roll Bonding of Cu/Ta Multilayers |
The Effect of Temperature on Strain-induced Austenite to Martensite Phase Transformation in SS 316L during Uniaxial Tension |
The Effect of Ultrasonic Vibration on Material Movement in Incremental Sheet Forming |
The Effects of the Shearing Speed on the Sheared Edge Quality and Edge Cracking |
The Evolution of Deformation Microstructures and Strain Hardening during Constrained Sliding with Implications for Metal Forming and Cutting Processes |
The Fundamentals of Microparticle Impact Bonding in Metals, Alloys, and Advanced Materials |
The Influence of Temperature and Strain Rate on the Superplastic Deformation Behavior and Microstructure Evolution of TNW700 Alloy |
The Local Strain Evolution for Structured Sheet Metals during Uniaxial Deformation |
The Process Design to Control the Yield Ratio of Yield-Ratio-Control-Steel on Both Wire Production and Forging Process |
The Study of Energy Absorption of Dual-material Tailored Plane Strain Sheet |
Thermomechanical Analysis and Experimental Validation of ECAP for Aluminum Sheet Metal |
Three-dimensional Analysis of Strip Rolling by Coupling Elastic Deformation of Rolls and Rolling Mills |
Towards an Efficient Industrial Implementation of W-temper Forming for 7xxx Series Al Alloys |
Towards Room-temperature Forming of Magnesium Sheet Alloys |
Transcription of Mirror-finished Surface onto A5083 Aluminum Alloy Plate by Friction Stir Forming |
Tribological Conditions in Hot Bending of 22MnB5 Tubes |
Tube Forming and Fabricating Technologies for Contributing Society by Tackling Problems of Environment and Aging Population |
Tube Roll Forming Flower Design and Flexible Roll Adjustment with CAE Simulation |
Ultrasonic Forming - Alternative to Orbital Riveting for Small Bimetallic Components |
Understanding the Microscale Plastic Behavior and Deformation Mechanism of Magnesium Alloy via Ex-situ Experiments and Full-field Crystal Plasticity Modeling |
Using Local Heat Treatment for Producing Uniform Profile Hollow Components by Radial Rotation Profile-forming |
Using Plasticity for Making High-performance Nanostructured Composites |
Vacuum Hot-roll Bonding of Titanium and Carbon Steel Using Pure Iron Interlayer |
Validation of Automatically Generated Forging Sequences Using FE Simulations |
Vision 2030: A Vision for America’s Science and Engineering Enterprise & Relevance to Advanced Manufacturing |
Welding of Aluminum in Chip Extrusion |
Work Hardening and Fracture Strain Measurement of Hardened SKD11 Steel Using Shear Punching Test |
"Learning by Seeing": Estimating Metal Plasticity Parameters Using In Situ Observations of Cutting and Indentation |