ProgramMaster Logo
Conference Tools for Materials Science & Technology 2019
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting Materials Science & Technology 2019
Symposium Corrosion of Additively Manufactured Metals
Presentation Title Corrosion of Additive Materials for Naval Applications
Author(s) Pin Lu, Marie Thomas, Abhinav Saboo, Dana Frankel, Greg Olson
On-Site Speaker (Planned) Pin Lu
Abstract Scope AM has gained tremendous interest from navy driven by the incentive to produce complex metallic materials in a faster, cheaper, and more flexible manner. Corrosion tests of several AM materials, including DED nickel aluminum bronze and SLM 17-4PH steel, have been conducted in navy-funded projects. New experimental results and findings will be reported and discussed in this presentation. For example, in one of the programs, effects of Ar and N2 atomization on pitting corrosion of SLM 17-4PH were evaluated, as well as the SCC behavior by rising step load testing. Optimization or re-design of these AM materials for improving microstructure and corrosion resistance will also be addressed.
Proceedings Inclusion? Definite: At-meeting proceedings

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Corrosion of Additive Materials for Naval Applications
Corrosion of Additively Manufactured Stainless Steels – Process, Structure, and Performance
Corrosion Performance of Aluminium Based Functionally Graded Materials Processed by Wire-arc Additive Manufacturing
Effect of Chloride and Heat Treatment on Pitting Corrosion Resistance and Mechanical Properties of a 316L Stainless Steel Manufactured by the Direct Metal Laser Sintering (DMLS) Process
Effect of Surface Finish on the Corrosion Properties of Additively Manufactured Stainless Steel
Electrochemical Characterization of Additively Manufactured Al-10Si-Mg in Standardized Test Solutions
Evaluation of the Corrosion Response of Additively-Manufactured 17-4 PH Stainless Steel Samples as a Function of Build and Finish Parameters
High Temperature Oxidation and Creep Oxidation of Compositionally Graded Alloys in Air and Supercritical CO2: Modeling and Experiment
High Temperature Oxidation of 718 Alloy Produced by Additive Manufacturing
Hydrogen Concentration and Uptake in Additively Manufactured Austenitic Stainless Steels
Improved Electrochemical Response of SLM 316L SS in Physiological Solutions
Issues in Localized Corrosion of Selective Laser Melted 316L
P3-37: Microstructure and Corrosion Behavior of Alloy 625 Produced by Laser Powder Bed Fusion
Surface Damage of an AM-AlSi10Mg Alloy Exposed to Corrosive Environments with Lack of Fusion Defects and Powder Contamination
Surface Preparation of Additively Manufactured Metals and Subsequent Comparison of Corrosion Characteristics
The Effects of Laser Peening Parameters on the Corrosion and Hardness Properties of Ti6Al4V Alloy
Understanding the Influence of Retained Nitrogen in Additively-Manufactured 17-4 Stainless Steel: Does it Really Improve Corrosion Resistance?

Questions about ProgramMaster? Contact programming@programmaster.org