|About this Abstract
||2018 TMS Annual Meeting & Exhibition
||Aluminum Alloys, Processing and Characterization
||C-22: Effects of Rare Earth Er Additions on Microstructure and Mechanical Properties of an Al-5Cu-2Mg Alloy
||S. Kord, Mohammad Alipour, M. H. Siadati, Masumeh Kord
|On-Site Speaker (Planned)
The effects of Er additions on the microstructure and tensile properties of cast Al-5Cu-2Mg aluminum alloy have been investigated. The results show that by adding 0.75 wt.% Er grain refiner in the cast alloy, the grains can be refined to a fine degree. The microstructures and fracture surfaces of cast aluminum alloy samples were examined by SEM. In addition, the Er modified the eutectic structure from a coarse plate-like structure to a fine branched and fibrous one. The tensile properties were improved by the addition of Er and T6 heat treatment, and good ultimate tensile strength (510 MPa) and elongation (17%) were obtained when the Er addition was 0.75 wt.%. Furthermore, fractographic examinations revealed that refined pore and spheroidized a-Al dendrite were responsible for the high ultimate tensile strength. At higher magnifications, unrefined specimens showed cracking along the grains, whereas Er-refined specimens showed cracks in individual intermetallic compounds.
||Planned: Light Metals